The D-Link DGS-F1210-26PS-E is a 24-port managed Gigabit switch. Here are the key features presented in point form:

– Port Configuration: The switch has 24 Gigabit Ethernet ports, allowing for high-speed wired connections for devices such as computers, servers, printers, and network storage devices.

– Managed Switch: The DGS-F1210-26PS-E is a managed switch, which means it offers advanced features and configuration options. It provides greater control over network traffic, security, and performance optimization.

– Power over Ethernet (PoE): The switch supports Power over Ethernet, specifically PoE+ (802.3at), on all 24 ports. This enables the switch to provide both data and power to compatible PoE-enabled devices, such as IP cameras, wireless access points, and VoIP phones, using a single Ethernet cable.

– PoE Budget: The switch has a PoE budget, which determines the total amount of power it can provide to PoE devices. The specific PoE budget of the DGS-F1210-26PS-E may vary and should be checked in the product specifications.

– Layer 2 Features: The switch supports Layer 2 networking features, including VLAN (Virtual Local Area Network) support, link aggregation, Spanning Tree Protocol (STP), and Quality of Service (QoS) mechanisms. These features help optimize network performance, improve security, and enhance traffic management.

– Management Options: The DGS-F1210-26PS-E can be managed through various methods, such as a web-based graphical user interface (GUI), Command Line Interface (CLI), or SNMP (Simple Network Management Protocol). These options provide flexibility in configuring and monitoring the switch.

– Rack-Mountable Design: The switch is designed for rack mounting, allowing it to be easily integrated into standard network racks or cabinets for organized deployment.

– Energy Efficiency: The switch incorporates energy-saving technologies, such as IEEE 802.3az Energy Efficient Ethernet (EEE) and D-Link Green Technology, which help reduce power consumption and lower operating costs.

These points provide a general overview of the D-Link DGS-F1210-26PS-E, a 24-port managed Gigabit switch with PoE support.

• Port Configuration: The switch typically offers 24 Ethernet ports, each capable of providing a data transfer rate of up to 1000Mbps (also known as Gigabit Ethernet). These ports can be used to connect various devices such as computers, printers, access points, IP cameras, and VoIP phones.
• Power over Ethernet (PoE): This switch supports PoE, which means it can deliver power to compatible PoE-enabled devices over the Ethernet cables. This eliminates the need for separate power adapters and simplifies the installation and deployment of network devices.
• PoE Budget: The switch typically has a total PoE power budget specified in watts. It determines the total amount of power available to be distributed among the connected PoE devices. The exact PoE budget may vary depending on the specific model.
• SFP Ports: In addition to the Ethernet ports, the switch usually includes two SFP (Small Form-Factor Pluggable) ports. These ports are used to connect to fiber optic networks or to add additional network uplink options.
• Long Distance Support: The switch is mentioned to support up to 250 meters of Ethernet cable length for PoE devices. This extended distance capability allows for greater flexibility in deploying PoE devices in larger spaces or remote locations.
• Quality of Service (QoS): D-Link switches often offer QoS features to prioritize and optimize network traffic. This ensures that critical applications and data receive priority, resulting in improved performance and reduced latency.
• Management Options: The switch may provide different management options, such as a web-based interface, Command Line Interface (CLI), or dedicated management software. These tools allow you to configure and manage various settings of the switch, monitor performance, and control connected devices.
• VLAN Support: D-Link switches typically support Virtual Local Area Networks (VLANs), allowing you to create separate logical networks within a single physical switch. This enables network segmentation, enhanced security, and better traffic management.

• Port Configuration: The switch typically offers eight Gigabit Ethernet (GE) ports for high-speed connectivity, allowing you to connect various devices such as computers, printers, access points, IP cameras, and VoIP phones.
• PoE+ Support: This switch supports PoE+ (Power over Ethernet Plus), which means it can deliver more power to compatible PoE-enabled devices compared to standard PoE switches. The increased power capacity allows for the connection and powering of devices that require higher power, such as PTZ cameras or access points.
• PoE Ports: The switch typically includes eight PoE ports, which are capable of delivering both power and data over Ethernet cables. These ports eliminate the need for separate power adapters for PoE devices, simplifying installation and reducing cable clutter.
• Uplink Ports: In addition to the PoE ports, the switch usually has two Gigabit Ethernet uplink ports. These ports can be used to connect the switch to the network backbone or other switches to extend the network.
• Long Distance Support: The switch is mentioned to support up to 250 meters of Ethernet cable length for PoE devices. This extended distance capability allows for greater flexibility in deploying PoE devices in larger spaces or remote locations.
• Power Budget: The switch has a specified PoE power budget in watts. It determines the total amount of power available to be distributed among the connected PoE devices. The exact PoE power budget may vary depending on the specific model.
• Quality of Service (QoS): D-Link switches often offer QoS features to prioritize and optimize network traffic. This ensures that critical applications and data receive priority, resulting in improved performance and reduced latency.
• Management Options: The switch may provide different management options, such as a web-based interface, Command Line Interface (CLI), or dedicated management software. These tools allow you to configure and manage various settings of the switch, monitor performance, and control connected devices.

HPE ProLiant DL380 Gen10 Intel Xeon Silver 4208 (8 Core, 2.1GHz, 11MB, 85W), 32GB RDIMM DDR4 2R 2933 (1x32GB), No
Optical Drive, 8 SFF Drive Bays (Hot Plug), No HDD, HPE Ethernet 1Gb 4-port FLR-T I350-T4V2 Adapter